1. XIAOMI 70mai Portable Vehicle-mounted Air Pump Air Compressor
แรงดันไฟฟ้า: DC12V กระแสไฟฟ้า 10A
ความดัน: 7bar (100 psi2)
ขนาด: 235x110X172.9 มม
อุณหภูมิ: - 30 °C
อุณหภูมิในการทํางาน: - 20 ° - 70 °C
Features: 1.Switch
machine: Disassemble the rope that binds the power cord, connect the car charger to the lighter, and the car starts When the lighter gets the power supply from the car, the device starts automatically.The device shuts down automatically when the car's charger is pulled out or the car turns off to stop supplying power to the lighter 2.Connecting trachea Tires for Jeep, SUV, automobile, motorcycle and other
vehicles: - Apply the air tube quick-pull connector directly to the tire inlet When the sound of tire deflating is heard, the air is circulating
Note: When there is no pressure, the above detection method is not applicable - Immediately press the quick-pull connector pressing plate 90 inwards At this time, the air is no longer discharged, and the air pipe is connected successfully Connecting rubber boats, inflatable toys, air mattresses and
balls: - Install the suitable air nozzle in the quick-draw connector of the air pipe and press the pressure plate 90 inward - Connect the corresponding air nozzle to the inflated
object: Long air
nozzle: used for beach ball, swimming ring and other inflatable toys, dust removal and cleaning purposes Short air
nozzle: used for inflatable bed Ball
needle: used in basketball, football, volleyball and other ball products 3 Detection pressure After connecting the air pipe, turn on the state, the pressure gauge display screen shows the current pressure 4 Preset pneumatic tire pressure Please follow the steps below to preset the inflated tire
pressure: - After the device is turned on, click R to convert units into bar, psi or kPa - Press or - button to flash the number, and then press or - button to adjust the desired value.Digital flashing stops, tire pressure is set 5 Inflating - After connecting the air pipe, press the inflatable start button to start inflating under the startup state.If the pressure gauge digital of the air pump rises rapidly for a short time (3 seconds rises to over 80psi), indicating that the air pressure is blocked, please immediately turn off the power, remove the quick-pull connector from the air port of the wheel and reconnect the air pipe - After inflation to the preset tire pressure, the air pump stops working and inflation is completed - Remove the filling head of the car and the device will automatically shut down
Note: When the pump stops working, the gauge reading will drop slightly and then stabilize, which is a normal back pressure phenomenon 6 Check inflation pressure -
Tires: The pressure classes of the tires of automobiles, bicycles and motorcycles is marked on the side wall of the tires.The tire gauge is marked near the inside of the driver's side door.Inflation pressure level and load weight, more detailed pressure recommendations, please consu.lt the car manual -
Ball: The inflated pres